01
Prepare the clay underneath
We moisture-condition, grade, and compact the subgrade over the black clay so the pad bears evenly and doesn't settle or lift under load as the soil cycles.
Proof
A job we'd put our name on
A pad sized to what actually sits on it and based for the clay underneath. Reinforced for the load up top and the shrink-swell down below, then cured through the heat.
Credibility comes from how it's built, not from promises. Here's the order of operations on every concrete pads & slabs job.
We moisture-condition, grade, and compact the subgrade over the black clay so the pad bears evenly and doesn't settle or lift under load as the soil cycles.
Slab thickness follows what goes on top. A shed pad and a shop floor holding vehicles are nowhere near the same pour.
Steel is matched to the job, from mesh on light pads up to a rebar grid for heavy loads, and it also spans the shrink-swell working below.
For enclosed or finished slabs we lay a vapor barrier to stop ground moisture wicking up, which counts on clay that stays damp after a wet stretch.
We place a mix suited to the load, score control joints, and cure it through the heat so the summer sun doesn't rush the set.
Most contractors vanish after the deposit. We pick up the phone, show up when we say, and stand behind the work after the truck leaves. The follow-through is the difference.
A foreman we know runs your job and a vetted crew does the work, managed by Lucky's, one company accountable from the first call to the final walkthrough.
COI and lien waivers on file before we break ground. The documentation that lets commercial clients pay and gives homeowners peace of mind.
Prepped subgrade, reinforced and mixed to spec for the job, and proper curing. We build credibility through the process, not promises. On concrete pads & slabs, that starts with prepare the clay underneath.
Pads and slabs in Central Texas price to the load and the soil: a mix suited to the use, reinforcement, and a conditioned, compacted base over clay. As a starting range, most run about $7 to $13 per square foot depending on thickness and whether a vapor barrier is in the picture. We scope and quote it around the weight it has to carry.
It follows the load. A shed pad is lighter than a garage or shop floor under vehicles and equipment, so we set thickness and reinforcement to your real use and account for the expansive clay beneath it.
Yes. Those are heavy, concentrated loads, so we bump thickness and reinforcement and match the mix to the weight. A hot tub also needs a level, stable base that won't shift as the clay swells and dries. Tell us the equipment and we build the pad for it.
For enclosed or finished slabs, usually yes; it keeps ground moisture from migrating up through the concrete, which is worth doing on clay that holds water after a rainy stretch. We make the call based on what the slab is meant to do.
Some do, depending on size, location, and use, and the rules differ across Austin and the surrounding Hill Country jurisdictions. We flag when a permit is likely so it gets handled up front instead of surfacing later.
Concrete keeps gaining strength after it looks set, and a summer pour needs a genuine cure rather than a fast bake. You get a clear load-it-by date tied to your specific pour.
You'll hear back from a real person, usually the same day. No call center, no runaround, no chasing us down.
Booking up fast this season. Or call (737) 530-9902